Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
1967 front Camber bolt question
Posted by: swi66 ()
Date: August 07, 2018 09:22AM

My 67 Monza is at the alignment shop today.

I got a call that the front lower control arm is stripped and that's why my alignment is way off and chewing tires.

I know I have camber bolts at home.

But, I'm not sure if they are front or rear.

Can anyone tell me how to tell the difference?

Length?

Thanks

Gary Swiatowy

Options: ReplyQuote
Re: 1967 front Camber bolt question
Posted by: Goop Of Oil ()
Date: August 07, 2018 09:59AM

Hi Gary,

The Front bolts are 4 5/16" long, approx 1 9/16" camber/washer diameter & 1/2" bolt thickness.
The Rear bolts are bigger.

Mark Holmlund

Options: ReplyQuote
Re: 1967 front Camber bolt question
Posted by: swi66 ()
Date: August 07, 2018 10:43AM

Thank You!

I figured the rears were bigger.

This gives me something to check

Gary

Options: ReplyQuote
Re: 1967 front Camber bolt question
Posted by: MattNall ()
Date: August 07, 2018 10:52AM

You can make them easily as well..just grind a flat on a normal bolt and slide the washer on!





MODERATOR
Sea Mountain, between Charleston Harbor and Coos Bay! SW Oregon Coast
Click HERE for My Website...Click HERE for My TechPages!
..............................110-PG.................................................Webered-Turbo

Options: ReplyQuote
Re: 1967 front Camber bolt question
Date: August 07, 2018 11:09AM

We have reproductions available at our ebay site.

Lon Wall
www.corvairunderground.com

Lon Wall

Fireman Sumpter Valley Railroad #3 and #19
svry.com
www.pacificmodelloggerscongress.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.