Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair

Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Posted by: Nelson ()
Date: July 11, 2018 01:09PM

Can anyone tell me if these wheels would fit my 63 monza convertible???

I thank for anyone’s input


Nelson Santos
Toronto Ontario Canada 🇨🇦

Options: ReplyQuote
Re: Wheels
Posted by: Seth Emerson ()
Date: July 11, 2018 11:50PM

Nelson - The bolt pattern matches. 4 on 114.3mm (4.5") The backspace is a bit much for the Corvair, though. In order to match the backspace of the Corvair wheel, you might have to add a spacer between the drum face and the wheel. Since they list the backspace 4.88 inches, you should measure your stock steel wheel and compare the backspace. If you can get within .25 inches of the Corvair, you are probably fine. What tires are you going to run?

Options: ReplyQuote
Re: Wheels
Posted by: moomba32 ()
Date: July 12, 2018 01:53AM

That looks like the 15x6 wheels I have on my 64. I used 1 inch thick billet aluminum spacers that bolt to the car then the wheel bolts to the spacer, fit is perfect. Some will say the spacers are not safe though, I've had them around 20 years now, no problem yet.

Don Marlowe
66 Monza 2Dr 140/pg
64 Spyder convertible now, 110/pg
Eutawville SC

Options: ReplyQuote

Sorry, only registered users may post in this forum.
This forum powered by Phorum.