Corvair Center Forum : Corvair Center Phorum
3 engines one for every price range! Memphis NEW YORK!!
Posted by: MattNall ()
Date: June 16, 2018 01:56PM
PICS AT [cnycorvair.com]
Ready to run , with everything on it , alternator (internal high amp regulated) new everything. Clark's pan , new 304 cam , heads redone ,Carbs rebuilt , new blower bearing , .060 full fin Cylinder kits , converter included. All tin work is on it , Manifolds are 140 Clark's. This block is converted RH block . I have done this successfully many times. It has been run @ 2 hours or more on the table. I originally built it for my rampy , but will not need it now. It has to be F O B Memphis NY 13112. It has to be cash money .Yes , I have pictures. Yes , I could have it running simply by putting a starter on it and my test fuel setup. I redone starter could be included in the deal. I am looking for $ 3800.00
I also have a GOOD used 61 Lakewood motor , runs great , has had valve job , has automatic chokes and later rebuilt Carbs on it.It has new late blower bearing and fan on it.The generator is there also.Lower shrouds are off it , but I can supply some. Manifolds are 1961 in OK shape.THe motor looks very good cosmetically. No price listed!
Another almost ready to run motor. It has a pan gasket leak. It runs strong. It is PG. (TO327Z Right now it is on its bell housing on a furniture dolly in storage (no oil in it , was fogged) $800.00 OBO. Again , it has to be F O B Memphis NY and cash deal. I MUST thin things out here very soon. Regards, Tim Colson email for pictures firstname.lastname@example.org,
Edited 2 time(s). Last edit at 07/19/2018 03:59PM by MattNall.