Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair

Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
gas heater install in a '63
Posted by: Cap'n Hook ()
Date: March 08, 2018 09:40AM

HI there,
I'm in the process of installing a gas heater in my '63 ragtop. I have headers on the car and decided to go this route to have heat when needed. My question is this: where do I hook the heater wire (the green one) to, to use the original heater connections for the hot wire and where do I hook the combustion blower wire (the blue one) to on a '63 versus a '60?
Thanks for any and all help
Randy (Cap'n) Hook

Options: ReplyQuote
Re: gas heater install in a '63
Posted by: cnicol ()
Date: March 08, 2018 09:52AM

The blue wire goes in the bottom fuse position (heater blower) and the green wire goes in the regular (heater) position.

Your kit should have a fuse clip that you insert from the backside of the panel to convert that last position into a complete fuse-holder.

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
60 Monza coupe (sold, sniff sniff)
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Options: ReplyQuote

Sorry, only registered users may post in this forum.
This forum powered by Phorum.