Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Wiring Question
Posted by: MoxyRamone ()
Date: January 25, 2018 03:52PM

I checked the FAQ's but I couldn't find what I'm looking for. My car was a 4 speed and still has the body harness for a manual. I am installing a PG. I have a PG dash harness with the neutral safety switch, etc. Will any modifications need to be made to the body harness for me to have reverse lights? Is it just plug and play or will I have to splice the wires that went to the reverse light switch that was on the manual transmission?

Any help would be greatly appreciated.

John Carver
Landrum, South Carolina

1964 Monza Convertible

Options: ReplyQuote
Re: Wiring Question
Posted by: MattNall ()
Date: January 25, 2018 04:35PM

Should be plug and play after connecting the 2 wires that went to the trans switch..





MODERATOR
Sea Mountain, between Charleston Harbor and Coos Bay! SW Oregon Coast
Click HERE for My Website...Click HERE for My TechPages!
..............................110-PG.................................................Webered-Turbo




Edited 1 time(s). Last edit at 01/25/2018 04:49PM by MattNall.

Options: ReplyQuote
Re: Wiring Question
Posted by: MoxyRamone ()
Date: January 25, 2018 04:47PM

Thanks, Matt!

John Carver
Landrum, South Carolina

1964 Monza Convertible

Options: ReplyQuote
Re: Wiring Question
Posted by: Seth Emerson ()
Date: January 26, 2018 12:01AM

Basically, John. You turn them on at the back, and interrupting them in the dash harness!

Seth Emerson

Check my new Performance Corvair Web site [www.perfvair.com]

Options: ReplyQuote
Re: Wiring Question
Posted by: Frank DuVal ()
Date: January 26, 2018 08:21AM

If this is a 64 manual,the back up lamp switch connector is halfway through the tunnel. Does not matter 3 or 4 speed, connector is in tunnel.

Run these two wires up to the reverse switch contacts (not the starter interlock contacts) on the PG dash lever/switch assembly.

Frank DuVal

Fredericksburg, VA

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.