Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
shift shaft seal
Posted by: ac1948 ()
Date: December 06, 2017 12:22PM

Anyone have a part # for shift shaft seal? Thanks, Jerry

Options: ReplyQuote
Re: shift shaft seal
Posted by: steve c goodman ()
Date: December 06, 2017 12:30PM

C/R 5606

best wishes, Steve
Rear Engine Spec. Inc. Golden, Colo.

1962 spyder 3.0L turbo---1965 Crown V8
1967 monza 110/4---1968 monza 110/4
1971 amante gt 110/4
CORSA/RMC/PPCC

Options: ReplyQuote
Re: shift shaft seal
Posted by: ac1948 ()
Date: December 06, 2017 03:49PM

Thanks Steve, also found I need the stub axle seals. Any # for these? Thanks, Jerry

Options: ReplyQuote
Re: shift shaft seal
Posted by: steve c goodman ()
Date: December 06, 2017 04:09PM

C/R 11514

more common is NTL 471707N

best wishes, Steve
Rear Engine Spec. Inc. Golden, Colo.

1962 spyder 3.0L turbo---1965 Crown V8
1967 monza 110/4---1968 monza 110/4
1971 amante gt 110/4
CORSA/RMC/PPCC

Options: ReplyQuote
Re: shift shaft seal
Posted by: jasvair ()
Date: December 06, 2017 06:00PM

I have both the axle seals and Shift Shaft seals in stock.
John Sweet
John's Corvair Parts

Options: ReplyQuote
Re: shift shaft seal
Posted by: vairmech ()
Date: December 07, 2017 05:23AM

Where are you located? There may be a local vendor near you!

Ken Hand
Handy Car Care
248 613 8586

Vairmech@aol.com

Options: ReplyQuote
Re: shift shaft seal
Posted by: ac1948 ()
Date: December 07, 2017 08:10AM

Thanks for the replies. Found some locally today. Jerry

Options: ReplyQuote
Re: shift shaft seal
Posted by: bnoggle ()
Date: December 07, 2017 01:14PM

Just a recommendation, be sure it started into the hole before using a socket to push it the rest of the way into the hole. I bent a new one just this week trying to install it.

Carlisle Pennsylvania
--
1962 Corvair 95 Rampside
1983 Chevy C-10

Options: ReplyQuote
Re: shift shaft seal
Posted by: richard1 ()
Date: December 07, 2017 01:21PM


Options: ReplyQuote
Re: shift shaft seal
Date: December 07, 2017 01:23PM

Also, be sure to smooth the area around the cross-link hole on the shift shaft. Anything hanging out there is likely to shave or damage the seal lip and cause leaks right away.


Dan Davis ~ Pierce County, WA ~ CORSA Western Director + Corvairs NW + North Cascades Corvairs + Corvanatics
1966 Corsa Turbo coupe ~ ~ 1966 140 Corsa ~ ~ 1965 Monza 140/4 'Vert Sierra Tan/Fawn ~ 1964 Monza 'Vert (SOLD) ~ 1960 Monza Ermine White/Red PG ++ ~ 1965 Monza 140/4 Evening Orchid w/ ivory/black interior ~ 1962 Monza Wagon 102/4 ~ 1963 Rampside/Scamper ~ 1963 Red/Greenbrier ~ 1969 Ultra Van #468

Options: ReplyQuote
Re: shift shaft seal
Posted by: caroseiii ()
Date: December 08, 2017 02:36PM

If anyone is interested in reproduction shift shafts for 61-65 four speeds, PM me. I had some drawn and machined for personal use for this fall and am considering reproducing these in stainless with a Corvair machine shop. Not sure there is enough interest but the existing supply is getting rusty!

Crawford Rose

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.