Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“Performance
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Part Needed for 1961 Monza Coupe
Posted by: MonzaJPD61 ()
Date: April 19, 2017 05:06PM

Looking for 2 each new or good used rear windshield exterior trim clips.
See photo.

needpart



Edited 1 time(s). Last edit at 04/19/2017 05:07PM by MattNall.

Attachments:
Options: ReplyQuote
Re: Part Needed for 1961 Monza Coupe
Posted by: GWLee ()
Date: April 20, 2017 07:12AM

Good luck finding those. Clark's hasn't had those for some time.

You may get lucky and find someone with a couple, but I doubt it, there have been a lot of people looking before now.

Most make the clip to hold the reveal trim on.

I bought a brass bolt and nut, then made the piece of metal so that it hooked into the reveal trim. Drilled the hole for the bolt and lightly threaded it to lock the bolt. Then shove the bolt thru the hole at the lower corner of the back glass. Then install the nut.

There is a lot of info on the forum of methods people have used to make those.

Good luck!

Lee Adkins

A Cave Man car
1960 2dr Coupe with pg
Color Tasco Turq.
With Ermine white top.

Catlettsburg,
In the Beautiful state of
North/East KY!

Not the best pic, but the only I had from then, 1997!

2016!

Options: ReplyQuote
Re: Part Needed for 1961 Monza Coupe
Posted by: MonzaJPD61 ()
Date: April 20, 2017 03:29PM

Thanks Lee

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.