Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Right/left turbo heads
Posted by: Chris King ()
Date: February 15, 2005 01:09PM

The various guides suggest that turbo heads were cast differently for the left and right sides of the engine - the right side one having the oil tube. Could you get away with using two right-side heads in the same engine?

Options: ReplyQuote
Re: Right/left turbo heads
Posted by: David Clamp ()
Date: February 15, 2005 02:31PM

Yes. Just block thew oil tube on the one you use on the left side. Also, some people just route the oil return to the valve cover when using two left heads or a non-turbo head on a turbo engine.

Options: ReplyQuote
Re: Right/left turbo heads
Posted by: Bigwave Dave ()
Date: February 16, 2005 08:50AM

The heads are the same left and right. There is a Turbo oil drain boss on both. The only difference is the boss is not used and not opened on the left side. Also the hookup for the manifold pressure gauge is thread onto the left head instead of the Vacuum retard. Just plug the hole and swap out the fittings for the gauge.

Attachments:
Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.