……
Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: Paulsgt ()
Date: December 10, 2015 10:27AM

Wow!!! I LOVE the Javelin! Very pretty!

Paul Sergeant
CORSA Central Division Director / CORSA Treasurer
Lee's Summit, MO
CORSA since 1975
Member – HACOA, Corvair Minnesota, CORSA, Little Indians, POCI


Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: cnicol ()
Date: February 18, 2016 08:38PM

There has been progress on the '65 Mustang 2+2! The bodywork is done and it's in primer. My body guy is going to let it shrink for a week before final blocking. (It has been blocked once already). Then, it's paint time! Black with red stripes.

This is the first time I've seen the car with doors and a front clip so it's finally looking like a real car. Another month and it will be sharing the shop with the '60 "Basket case" car. In reality, the Mustang is even more of a basket case than the '60. The only parts on the Mustang beyond the basic shell was the front and rear suspension, and those parts have to come off!

The bottom picture isn't my car but this is where I'm headed. (Just a few more dollars! grinning smiley and I'll be there! LOL)

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
65 Canadian Monza 4dr 110/PG 40k
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Attachments:


Re: OT - My next project '65 Mustang 2+2 Restomod
Date: February 18, 2016 09:55PM

Nice! Big plus to have a body shop that get's with the program!
That is going to be a fine oat burner, no doubt.

Are you going to bring your CaVe Monza over to the Econo-Run in Oregon this year?
end of April is still awhile away.


Dan Davis ~ Pierce County, WA ~ CCF admin ~
CORSA +Corvairs NW + North Cascades Corvairs + Corvanatics
1966 Corsa Turbo coupe ~ ~ 1966 Corsa 140 Coupe ~ ~ 1965 Monza 140/4 Convertible Sierra Tan/Fawn ~ 1964 Monza Spyder Convertible ~ 1960 Monza Ermine White/Red PG ++ ~ 1965 Monza 140/4 CoupeEvening Orchid w/ ivory/black interior ~ 1962 Monza Wagon 102/4 ~ 1963 Rampside/Scamper ~ 1963 Red/Greenbrier ~ 1969 Ultra Van #468

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: Setterz54 ()
Date: February 20, 2016 08:44AM

That looks awesome! In no time you will have one beautiful Mustang!

Setterz54
Fulton,MD.

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: cnicol ()
Date: February 20, 2016 09:19AM

I'm excited too but between the '60 "Fimonza" and the Mustang, the only way to keep my credit card from catching fire is to store it on ice!eye popping smiley

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
65 Canadian Monza 4dr 110/PG 40k
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: sportwagon400 ()
Date: February 20, 2016 03:49PM

send them to Calgary is very cold here especially since the boss asked how much the 69 GS convert was costing to restore eye popping smileyeye popping smiley
haha

Current rides for
Mr Buick
69 GS 400 Convertible Buckets Console Air ( now fully restored )
37 Chev 2 dr sedan hot rod 350 4 spd Muncie
95 Chev Camaro Z28 convert 350 LT1
65 buick Sportwagon 350 SBB 2004R w factory air
72 Olds Cutlass
67 Olds Vista Cruiser
69 Dune Buggy 110 HP Corvair powered Crown conversion


Please tell my wife I have another woman it would be easier to explane!



Edited 1 time(s). Last edit at 02/20/2016 03:51PM by sportwagon400.

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: red monza ()
Date: February 20, 2016 07:12PM

My best friend just finished a 66 2 plus 2 resto mod....TCI front end, 5 or 6 speed trans...modified 302 or 5.0....petty blue color....glass insert in the roof vent..air...etc...its a nice one.

The last one he fixed up was a 67 390 GT fastback...he was asking 45M for it and sold it within an hour of showing it at Pigeon Forge...it was black with red interior...it was nice too...It went to Dallas Tx....59M asking...the next time we saw it was in Germany...again...it was a very nicely done car.

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: cnicol ()
Date: April 17, 2016 09:00AM

It's BACK! smiling bouncing smiley

My paint and body guy, Karl Fuller "Maddog Kustoms" of Spokane, WA, did his usual amazing work. You could easily read a book in the reflection of any body panel. I'm so pleased!

Now I have to get to the meat of the project; installation of all the components and construction of the interior, doors, glass, trim, and so-on. (But first I have to put out the fire in my checkbook!)

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
65 Canadian Monza 4dr 110/PG 40k
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts




Edited 1 time(s). Last edit at 04/17/2016 09:57AM by MattNall.

Attachments:


Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: glivorsi ()
Date: April 17, 2016 10:19AM

I'm confused by the dash. Is that a frame that goes under the dash pad? The things with 3 diamond dimples on each side.

Greg in Wildwood, MO (part of the St. Louis urban sprawl)

1965 Monza Vert 110PG, Crocus Yellow with black interior and top

2014 Honda Accord V6 (DD)
2017 Honda Pilot (wifemobile)
2012 Chevy Sonic 1.8L (kid's car)
1997 Honda CBR1100XX
2006 Mazdaspeed 6 (no longer own)

Re: OT - My next project '65 Mustang 2+2 Restomod
Date: April 17, 2016 04:15PM

Indeed - that is the Upper Dash Pad Foundation.
It's designed to hold the foam/vinyl pad enough to get the full impression of your face when it impacts!! smoking smiley


Dan Davis ~ Pierce County, WA ~ CCF admin ~
CORSA +Corvairs NW + North Cascades Corvairs + Corvanatics
1966 Corsa Turbo coupe ~ ~ 1966 Corsa 140 Coupe ~ ~ 1965 Monza 140/4 Convertible Sierra Tan/Fawn ~ 1964 Monza Spyder Convertible ~ 1960 Monza Ermine White/Red PG ++ ~ 1965 Monza 140/4 CoupeEvening Orchid w/ ivory/black interior ~ 1962 Monza Wagon 102/4 ~ 1963 Rampside/Scamper ~ 1963 Red/Greenbrier ~ 1969 Ultra Van #468

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: SpyderMan ()
Date: April 17, 2016 05:40PM

Wow Craig that paint is out of hand!!

Love it.

Sam Russell
Durham NC
1962 Monza Wagon Ted Brown EFI Gen II
1964 Spyder coupe


Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: OzJavelin ()
Date: April 18, 2016 04:05AM

Great job .. looks great!
People often talk trash about Mustangs, but they are great cars and having parts availability and interchange just makes them more suitable as regular drivers.
Cant wait to see this one finished.

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: cad-kid ()
Date: April 18, 2016 04:46AM

Wow! Just wow!smiling bouncing smiley

Jeremy (cad-kid)
Kronenwetter, WI (Central Wisconsin)
SOLD-9-2016 65 Monza 4spd/140
<a href=http://corvaircenter.com/phorum/read.php?1,570615>My 65 Monza thread</a>
<a href=https://www.youtube.com/user/cad0kid>My YouTube page</a> yawning smiley

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: guy63 ()
Date: April 18, 2016 07:31AM

Craig, that is an awesome look so far! Can't wait to see it complete!

Guy
63 Spyder Coupe
Minnetonka, MN, but soon to be Harrisville, NH
<img src=http://corvaircenter.com/phorum/file.php?1,file=142718,filename=19577529_1908805572676603_5068088240259900211_osmall.jpg>

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: TheRealHip ()
Date: January 06, 2017 07:42AM

Hey so is this running yet?

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: cnicol ()
Date: January 06, 2017 07:48AM

TheRealHip Wrote:
-------------------------------------------------------
> Hey so is this running yet?

Craig replies: Not quite yet. Currently I'm working on custom front and rear suspension.

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
65 Canadian Monza 4dr 110/PG 40k
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: cnicol ()
Date: December 17, 2017 08:56PM

Well here we are almost a year since my last post. (It's been a tough year health-wise but I'm mostly back at it now)

I've narrowed the Explorer 31-spline 8.8" disc brake rear axle and adapted a 4-link rear suspension kit. Man that was fun. It was supposed to fit but absolutely NOTHING fit! Such a deal.

Next is the subframe-connector kit which connects the rear "frame rails" to the front "frame rails".

After that, I'll start working on the rack & Pinion, Coil-over front suspension.

Now that I have the rear trimmed out (lights, bumpers, EFI fuel tank, new backlite, polished trim) I will either start to trim-out the doors or the front end. I really like trimming-out a freshly painted car; that's my favorite part.

One of my funny little observations: I probably have 300# of sorted nuts and bolts from various GM and German car projects. NONE of it works for a Mustang!!
Tail light screws-Nope. Tail light nuts-nope, door latch screws-Nope. Bumper bolts-nope! So far I've had to purchase every little nut bolt and screw - I could build six Corvairs and not need a thing...hot smiley

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
65 Canadian Monza 4dr 110/PG 40k
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Attachments:


Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: MattNall ()
Date: December 17, 2017 09:07PM

Nothing can stop you now!

MODERATOR
Sea Mountain, between Charleston Harbor and Coos Bay! SW Oregon Coast
Click HERE for My Website...Click HERE for My TechPages!
...............110-PG.................................................Webered-Turbo

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: Anonymous User ()
Date: December 17, 2017 09:12PM

What a relief! I'm glad none of that crappy metric German hardware made it's way into your pony. An absolute travesty if it had.
Looking good,Craig!😉

Re: OT - My next project '65 Mustang 2+2 Restomod
Posted by: alpha1906 ()
Date: December 17, 2017 09:51PM

I own a 2016 5.0, so I'm always keen to see another Mustang live. But yeah, but a Coyote in it.

Sorry, only registered users may post in this forum.
This forum powered by Phorum.