Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Bosch W8AP
Posted by: TheL36Driver ()
Date: June 20, 2010 03:14PM

Correct heat range for a '65 110? Threads are a tad long.

Had these in the '66 140 I ran for a little while. Kid at OReillys sold 'em to me.

I've owned three too many Corvairs.

Carl in St. Joseph, Mo.
'62 Monza coupe W/110 hp. Replaced the turd 140.
My other car is a '67 Corvette.
[forums.corvetteforum.com]

Options: ReplyQuote
Re: Bosch W8AP
Posted by: steve c goodman ()
Date: June 20, 2010 03:37PM

Hello Carl: It has been my experience that the platinum tip Bosch plugs don't work that well in normal Corvair engines. If you have an HEI or another hot ignition system they work ok. HOT does NOT include ignitors.......

I use W8AC instead. Again, the above is my observation/opinion only.

Sincere regards, Steve

1962 spyder 3.0L turbo 1967 monza 110/4
1968 monza 110/4 1971 amante gt 110/4

Golden, Colo. CORSA/RMC/PPCC

Options: ReplyQuote
Re: Bosch W8AP
Posted by: TheL36Driver ()
Date: June 20, 2010 06:10PM

Thanks Steve.

About time I checked what I put in there the last time. Been a couple years. May try these while I'm at it.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.