 | |||||
 |
 |
 |
 |
 |
 |
 | |||||
Corvair Center Forum :
Corvair Center Phorum - presented by CORSA
Attachments:
Re: Clean up input shaft
Corvair Center
Clean up input shaft
Posted by:
joelsplace
()
Date: May 24, 2023 03:39PM
Maybe some steel wool?
Joel
Northlake, TX
5 Ultravans, 145 Corvairs and counting...
Joel
Northlake, TX
5 Ultravans, 145 Corvairs and counting...
Attachments:
Re: Clean up input shaft
Posted by:
kmart356
()
Date: May 24, 2023 04:00PM
Wire brush attachment on drill will take that right off. Don't forget a new pilot bushing 
Ken
'62 Spyder
Florida
Ken
'62 Spyder
Florida
Re: Clean up input shaft
Posted by:
wittsend
()
Date: May 24, 2023 04:08PM
kmart356 Wrote:
-------------------------------------------------------
> Wire brush attachment on drill will take that right off. Don't forget a new pilot bushing
And JB Weld Spline Improver..., IF needed.
------------------------------------------------------------------------------
***'61 Lakewood, a "Freebie" in hibernation for 28 years - In the process of applying CPR.***
-------------------------------------------------------
> Wire brush attachment on drill will take that right off. Don't forget a new pilot bushing
And JB Weld Spline Improver..., IF needed.
------------------------------------------------------------------------------
***'61 Lakewood, a "Freebie" in hibernation for 28 years - In the process of applying CPR.***
Re: Clean up input shaft
Posted by:
joelsplace
()
Date: May 24, 2023 04:45PM
Good input. After half a dozen people read the post and didn't respond I thought I had you stumped on the proper procedure.
Joel
Northlake, TX
5 Ultravans, 145 Corvairs and counting...
Joel
Northlake, TX
5 Ultravans, 145 Corvairs and counting...
Re: Clean up input shaft Posted by:
Beers
()
Date: May 24, 2023 05:13PM
Nothing a jeweler’s file and a Speedi-sleeve wouldn’t fix! Get another 100K out of it
‘63 Monza Spyder convertible [www.corvairforum.com]
SF Bay Area, CA
‘63 Monza Spyder convertible [www.corvairforum.com]
SF Bay Area, CA
Re: Clean up input shaft
Posted by:
Gatorfly
()
Date: May 24, 2023 06:18PM
joelsplace Wrote:
-------------------------------------------------------
> Good input. After half a dozen people read the post and didn't respond I thought I had you stumped on the proper procedure.
… I just couldn’t find the words Joel
San Juan Islands, WA
1966 Corsa Coupe 180/4 Marina Blue/Blue
1965 Corsa Coupe 140/4 Glacier Gray/Black
-------------------------------------------------------
> Good input. After half a dozen people read the post and didn't respond I thought I had you stumped on the proper procedure.
… I just couldn’t find the words Joel
San Juan Islands, WA
1966 Corsa Coupe 180/4 Marina Blue/Blue
1965 Corsa Coupe 140/4 Glacier Gray/Black
Re: Clean up input shaft
Posted by:
doug6423
()
Date: May 24, 2023 06:35PM
You should start selling some them thar fine parts! 
Doug
65 Monza
Cincy, OH
Doug
65 Monza
Cincy, OH
Re: Clean up input shaft
Posted by:
American Mel
()
Date: May 24, 2023 06:57PM
You leave that in a can of Vinegar overnight, and it will be good as NEW in the morning! 
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
WA. state, 1 mile south of the Canadian border, I am not at the end of the world, but you can see it from here.
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
WA. state, 1 mile south of the Canadian border, I am not at the end of the world, but you can see it from here.
Re: Clean up input shaft
Posted by:
joelsplace
()
Date: May 24, 2023 07:32PM
No llow-lying! I know what I've got!
Joel
Northlake, TX
5 Ultravans, 145 Corvairs and counting...
Joel
Northlake, TX
5 Ultravans, 145 Corvairs and counting...
Re: Clean up input shaft
Posted by:
Bali
()
Date: May 24, 2023 07:50PM
On ebay you can list that as being "used like new".
Re: Clean up input shaft
Posted by:
RobertC
()
Date: May 24, 2023 07:53PM
A pan of Coca Cola and it will look like new...
Re: Clean up input shaft
Posted by:
Timothy Shortle
()
Date: May 24, 2023 11:04PM
I would hate to see what it looked like before you cleaned it up.
Re: Clean up input shaft
Posted by:
Tramp61
()
Date: May 25, 2023 04:21AM
I think we should debate which lubricant is best for an input shaft like that.
Craig T
Central NY
1961 Tramp (truck with a ramp)
Craig T
Central NY
1961 Tramp (truck with a ramp)
Re: Clean up input shaft
Posted by:
wittsend
()
Date: May 25, 2023 11:19AM
Tramp61 Wrote:
-------------------------------------------------------
> I think we should debate which lubricant is best for an input shaft like that.
Evaporust would be my lubricant of choice. But lets wait and see what Richard1 has to say.
------------------------------------------------------------------------------
***'61 Lakewood, a "Freebie" in hibernation for 28 years - In the process of applying CPR.***
-------------------------------------------------------
> I think we should debate which lubricant is best for an input shaft like that.
Evaporust would be my lubricant of choice.
But lets wait and see what Richard1 has to say. ------------------------------------------------------------------------------
***'61 Lakewood, a "Freebie" in hibernation for 28 years - In the process of applying CPR.***
Re: Clean up input shaft
Posted by:
vairchet
()
Date: May 25, 2023 12:29PM
That input shaft is in better condition than what I've scrapped out this past year.
Some Corvair Guy in Ramona
Some Corvair Guy in Ramona
Re: Clean up input shaft
Posted by:
Wills69
()
Date: May 26, 2023 06:42AM
Alas. thou hast found the CORVAIR SCEPTRE and shall rule over many Corvairs
Will
69 500
Will
69 500
Sorry, only registered users may post in this forum.