Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair

Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum - presented by CORSA The fastest message board... ever.
Corvair Center 
Carb to head gasket question, rotated carbs
Posted by: keitho64 ()
Date: May 22, 2023 08:59PM

I started a thread yesterday about an issue I am troubleshooting, I have the driver's side of my engine not running right. [corvaircenter.com]

I was reading this thread [corvaircenter.com] and it got me looking a bit closer, since my carbs are rotated 90 degrees. The gaskets are flat, the carb is seated square but I noticed the notches in the gasket do not line up with the port on the head. These two openings do match up the the base of the carb. Is this normal or should this part in the carb rotator have a provision for the gasket?

64 Monza Convert
00 911 C2
"Horizontally Opposed"
05 GTO 6-speed (Gotta have a V8)
Chicago Burbs; the Anti-Dragon... 11 turns in 318 miles

Options: ReplyQuote

Sorry, only registered users may post in this forum.
This forum powered by Phorum.