Interested in the OG, old school, "Cold Air Intake"?
Very good original condition.
$75.00 plus shipping. Box is 19x13x6 and weighs 7 pounds. Shipping from 98004

Steve

On the Wet side of Washington State

one too many cars,(maybe)

multiple Corvairs.
1962 Buick Skylark
1967 Datsun 2000 roadster



Edited 1 time(s). Last edit at 05/20/2023 12:39AM by MattNall.

Do you also have the correct PCV tube for the Oil Bath paper air cleaner housing?
Not easy to find.

Corventure Dave

Didn't know about the PCV tube being different. I'll look for that. Thanks Dave.
I had two of these assemblies, and both are on their way to new owners.
SOLD, but new info like Dave's always welcome.

Steve

On the Wet side of Washington State

one too many cars,(maybe)

multiple Corvairs.
1962 Buick Skylark
1967 Datsun 2000 roadster

The PCV tube that is needed is a shorter version (side to side) of the standard tube. I believe that I have several of them. The easy way to spot them is if the air cleaner snorkel points to the drivers rear corner. If it does it is the tube that was used with the oil bath. I think that the oil bath tubes were used if there was a shortage of the regular tubes to keep the assembly line moving, because alot of cars without the oil bath seem to have them.

RJ tools
Salem,Oregon

one of these?

On the Wet side of Washington State

one too many cars,(maybe)

multiple Corvairs.
1962 Buick Skylark
1967 Datsun 2000 roadster

No, the straight one in front if it was an inch or two shorter would be the one used on the oil bath. The one with the curve in the back is for a 140hp.

RJ tools
Salem,Oregon