………
![]() ![]()
| |||||||||||||||||||
![]() ![]() ![]() ![]() ![]() ![]() |
Corvair Center Forum :
Corvair Center Phorum - presented by CORSA
![]() Corvair Center 67 door hinge bushing change help Posted by:
Kevin H
() Date: March 18, 2023 07:09PM Hi would anyone have any tips on removing pin so I can change broken bushings? Pin is upside down and looks welded, is that normal? Thanks Re: 67 door hinge bushing change help Posted by:
Kevin H
() Date: March 18, 2023 08:00PM pic Monrovia, CA 67 Monza 110 CV Attachments: ![]() Re: 67 door hinge bushing change help Posted by:
RexJohnson
() Date: March 18, 2023 08:17PM That is the bottom. They use some kind of chisel tool to peel down metal on both sides of the pin to keep it from coming out. I would file both of those burrs off and with alot of lube I would try tapping it down. Use some kind of big punch because if you hit the pin with the hammer you will mush it over and then it won't come out. RJ tools Salem,Oregon ![]() Re: 67 door hinge bushing change help Posted by:
Frank DuVal
() Date: March 18, 2023 10:52PM What Rex says, file or grind the nibbins off and drive the pin out. Easier with the hinge off, but then you have to align the door. Frank DuVal Fredericksburg, VA Re: 67 door hinge bushing change help Posted by:
Kevin H
() Date: March 18, 2023 11:01PM Thank you Rex and Frank! Very much appreciated Monrovia, CA 67 Monza 110 CV Sorry, only registered users may post in this forum. |