I am finally getting the Binion based EFI engine installed in my wifes '64. I need trigger wheel. I see a number on ebay. Looking for a source / part number if someone can recommend one that fits well.
Thanks!

I installed an EDIS ignition on my turbo and I needed a trigger wheel to fire it. I got the trigger wheel from trigger-wheels.com. I just used these guys because they had other EDIS parts I needed.

http://trigger-wheels.com/store/contents/en-uk/d5.html

I got the 36-1 5.125" trigger wheel with the 1/2" pilot hole.

I did NOT mount the trigger wheel on the pulley. You can get more info on my trigger wheel install from here:
EDIS White Paper

Alec
Dahlonega, GA
1965 Corsa Convertible Turbo 4-Speed
Restoration "In Progress"

I used a trigger wheel from Ted Brown from my EDIS system. It bolts to the balancer. He had them advertised on eBay but this was several years ago

Ken Henry, Rochester, NY USA
1965 Corvair Corsa
140 hp, 4 speed

Brilliant! That's exactly what I was after.
Thanks Alec!

I have 36-1 and GM 7x trigger wheels in stock. They bolt directly to the harmonic balancer and already have holes pre-drilled. I also have them without the notch missing if you need the (1) missing at any degree.



$29.00 + 5 Shipping - Lower US only.

Thanks

Ted

2 & 4TBI units are available through Corvair-EFI.com
Ted Brown
Anderson, SC
Brown Injection Facebook
65 Monza Convert 140 4 Speed - EFI
68 Monza Convert Auto - EFI (Undergoing Resto)
63 Greenbrier 4 Speed - EFI (Daily Driver)
61 Loadside 2.9L - PGlide - EFI (Driveway)
61 Rampside - 4 speed - EFI
61 Greenbrier 4 speed - EFI
61 Greenbrier 4 Speed - Bad Motor
64 Monza 4 Speed - EFI



Edited 1 time(s). Last edit at 09/27/2022 09:09PM by TedBrown.

Ted - I emailed you several times with no response, maybe they didn’t get through. I am interested in a wheel and several other parts if you have them available.
Thanks!
Geoff

Email Sent. Thanks for letting me know.

Ted