……
Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Falcon machine shop
Posted by: Wills69 ()
Date: September 19, 2022 08:22AM

Anyone have head work done by Mark Petniunas or have his contact? is he on CCF?

Thanks

Will
69 500

Re: Falcon machine shop
Posted by: Lane66m ()
Date: September 19, 2022 08:39AM

Only comment on him and it is 11 years old.
[corvaircenter.com]

Any link on web I found for Falcon Machine Shop was not working. I had never heard the name before and I have been on here since 2009 and active since 2014.

That might say something, but not sure what.

Stick with known cuurrently corvar head work people called out on this forum. Ken Knoblauch, Ken Hand, California Corvairs and Corvair Ranch are some that come to mind. I had miy 110 heads done by Tom Knoblauch in San Antonio. Quality rework and his modifications adds power to the 110 engine.

Re: Falcon machine shop
Posted by: Timothy Shortle ()
Date: September 19, 2022 10:24AM

Steve Goodman in Golden Colorado. Ray Sedman in Northridge California.

Re: Falcon machine shop
Posted by: Wills69 ()
Date: September 19, 2022 10:30AM

Thanks for the suggestions.
Wisconsin is close, Michigan where Mr. Hand is too.

Will
69 500

Re: Falcon machine shop
Posted by: Wagon Master ()
Date: September 19, 2022 10:43AM

If you're going to ship, it matters little where they go. If you're going to tighten (close up) the quench pad area, be careful how this is achieved as it effects other areas.

Friends Don't Let Friends Drive Stock
Been Aircooled Since 1973
Northwest Ohio 45840

Re: Falcon machine shop
Posted by: 110PG ()
Date: September 19, 2022 02:22PM

Error

Joe Nelson
Western WI

66 Corsa Turbo CPE
84 380SL
69 Monza CPE (sons car)



Edited 1 time(s). Last edit at 09/19/2022 02:23PM by 110PG.

Re: Falcon machine shop
Posted by: JimBrandberg ()
Date: September 20, 2022 05:01AM

Looks like Falcon is in reference to William Wynne Fly Corvair.
Who do you mean in Wisconsin?

Jim Brandberg
Isanti, MN
CorvairRepair.com



Re: Falcon machine shop
Posted by: Wills69 ()
Date: September 20, 2022 05:15AM

Hey Jim,

I think his name is Mark Petniunas.


Will
69 500

Re: Falcon machine shop
Posted by: roger65180 ()
Date: September 20, 2022 05:35AM

he is still doing corvair heads and engine builds , he is just south of Madison Wi phone number is 608 835 3317 , leave message he seldom answers . I have a set of 140 heads from him on my turbo corvair his work is very good he works alone so turn around time is sometimes long

Roger R
Madison Wi
62 ct pg turbo
65intercooled 180 4sp,autocrosser
62 Rampy

Sorry, only registered users may post in this forum.
This forum powered by Phorum.