Posted by: jfreez ()
Date: June 22, 2022 01:30PM
I am trying to learn as much as I can about quick steering. I found a set of NOS QS arms that should be showing up in a couple of days.
How much improvement will I see with just the arms?
does anybody have the part numbers for a QS box?
can a standard box be converted? with what part numbers?
I understand it will cause my turn radius to go up and take more effort to turn.
Posted by: pvholgado ()
Date: June 22, 2022 01:53PM
Search for quick steering- you shoud find a thread with the answer that the arms alone can reduce lock to lock about 3/4 of a turn over standard arms and std. box- the QS box and QS arms can reduce lock to lock to 3.5 turns. Std. arms and std. box is about 5+ turns.
"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY
Posted by: jfreez ()
Date: June 22, 2022 03:01PM
I have searched several threads and most of the info is about the arms and the driving difference. I still would like to find some part numbers specific to the box.
I usually find a lot of part number info on gmpartswiki, but it is running slow for me. (maybe the guys in I.T. don't want me spending so much time there)
Posted by: edconnolly ()
Date: June 22, 2022 04:22PM
The parts unique to the quick box--worm gear, ball nut, ball guides--are long, long gone new. You could probably convince someone to sell an intact QS box in good condition but it would be expensive.
Posted by: Mike Stillwell ()
Date: June 22, 2022 06:11PM
The only part number you would find, is for the housing itself, not the completed assembly.
Posted by: Seth Emerson ()
Date: June 22, 2022 06:43PM
Without turning the input shaft lock to lock, there is no way to ID the quick OEM box externally. Maybe there was a color blotch applied when new - some 60 years ago. The factory quicker arms, used whenever the quick box was specified do a portion of the job of making the overall steering quicker, maybe 15-20%? Remember that the term "lock-to-lock" has to be referenced whether in the car or not installed. When installed in the car, the stop on the steering arm - hitting the end of the caster strut - determines the end of the travel. The box may or may not be at the end of "it's" travel.
Posted by: PGVair ()
Date: June 23, 2022 04:38PM
I've used factory short arms on several cars and both the QS box & arms on others. The arms alone reduce lock to lock from about 5-1/4 turns to about 4. I find this to suit my preference without much change in steering effort. With the QS box lock to lock should be about 3-1/2 turns, but the effort seems to be more noticeable. Effort also depends on tire width. I use 195 width on mine, which is not very difficult to turn. On my car with the QS arms and box, I find it helps if you start rolling a little before trying to turn sharply. Also if you use a smaller aftermarket steering wheel effort increases.