………
![]() ![]()
| |||||||||||||||||||
![]() ![]() ![]() ![]() ![]() ![]() |
Corvair Center Forum :
Corvair Center Phorum - presented by CORSA
![]() Corvair Center Plastic Chrome Plating order in progress Posted by:
67 airvair
() Date: June 21, 2022 10:21AM All, I am gathering up plastic parts to make up another order for my plater. If you have anything plastic that needs replating, please PM me. All parts need to be either ready for the plater (stripped of chrome or other coatings like paint) OR ready to strip. If I have to strip them, there is a $5 fee per item for doing so. Surfaces must be smooth as glass and free of defects, as imperfections are magnified many times over by the plating. I assume no responsibility for imperfections, unless repairs are requested. I can fix small chips using JBWeld and cracks with super glue, but there are limits. I cannot fix pulled screw holes, missing chunks, or broken tabs. If you have any questions, feel free to contact me. Finished costs usually run somewhere between $15 and $25 for each item, but are dependent on a number of variable factors and cannot thus be accurately predicted. -Mark Re: Plastic Chrome Plating order in progress Posted by:
Klovellm
() Date: June 29, 2022 05:16PM How can I place an order for a set of four smoked lenses for a 65 Monza? Re: Plastic Chrome Plating order in progress Posted by:
American Mel
() Date: June 29, 2022 06:05PM Klovellm Wrote: ------------------------------------------------------- > How can I place an order for a set of four smoked lenses for a 65 Monza? Smoked LENSES ? ? ? ![]() I think you might be looking for azdave. He made taillight lenses, and made some smoked. If that is not what you are looking for, then you need to be a bit more specific in detail. -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- WA. state, 1 mile south of the Canadian border, I am not at the end of the world, but you can see it from here. ![]() ![]() ![]() ![]() Re: Plastic Chrome Plating order in progress Posted by:
Klovellm
() Date: June 30, 2022 09:53PM How can I reach Azdave to place an order for a set of four smoked tail light lenses for a 65 Monza Kevin Re: Plastic Chrome Plating order in progress Posted by:
American Mel
() Date: June 30, 2022 10:03PM Send him a Private Message (PM). His moniker is azdave, no capitals. -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- WA. state, 1 mile south of the Canadian border, I am not at the end of the world, but you can see it from here. ![]() ![]() ![]() ![]() Last Call! Plastic Chrome Plating order Posted by:
67 airvair
() Date: July 25, 2022 08:51PM Am getting ready to contact my plated, then ship to him whatever I have. Contact me immediately if interested. -Mark Sorry, only registered users may post in this forum. |