Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair

Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum - presented by CORSA The fastest message board... ever.
Corvair Center 
alignment specs for 1961 Monza
Posted by: William Pierson ()
Date: May 22, 2022 03:24PM

1961 Monza Coupe P185/80/R13 tires. I need front alignment specs

Bill Pierson

Options: ReplyQuote
Re: alignment specs for 1961 Monza
Posted by: junkman ()
Date: May 22, 2022 08:07PM

It is in the factory shop manual. The bigger problem is finding someone willing to do the alignment the way that the factory specifies it should be done. Bring the manual with you, and spray all the bolts with Deep Creep at least a week before it is going to be aligned. Most times, if the bolts don't move, they will not spend the time to get them loose. The most difficult is getting the rear alignment, and finding the necessary alignment shims. If you don't bring a good assortment of shims with you, they most likely will not touch it.

Woodstock CT... Located on the Connecticut / Massachusetts border, approximately 6 miles from the center of Southbridge MA. About 45 minutes from Hartford CT. 1 1/2 hours West of Boston MA. Woodstock CT to Los Angeles CA 2,937.1 miles. 1 Mile as the crow flies to Big Bird's nest.

Options: ReplyQuote

Sorry, only registered users may post in this forum.
This forum powered by Phorum.