Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
'60 Baffle?
Posted by: joelsplace ()
Date: September 14, 2021 05:33PM

I've never seen one like this that I can remember but I'm not up on '60 stuff.

Joel
Northlake, TX
5 Ultravans, 119 Corvairs and counting...

Attachments:

Options: ReplyQuote
Re: '60 Baffle?
Posted by: cnicol ()
Date: September 14, 2021 07:52PM

Baffles were different when there was a passive road draft system instead of the much higher flow pcv system.

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
60 Monza coupe (sold, sniff sniff)
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Options: ReplyQuote
Re: '60 Baffle?
Posted by: RexJohnson ()
Date: September 15, 2021 07:39AM

The top cover for the road draft tubes used a flat paper gasket instead of an o-ring where the tube inters the cover. Since it used a gasket the hole was not beveled for the o-ring.

RJ tools
Salem,Oregon

Options: ReplyQuote
Re: '60 Baffle?
Posted by: vairmech ()
Date: September 16, 2021 05:04AM

That was used up through 1962 when the road draft was changed to a PCV as Craig mentioned. Then there were the paper thin baffles that will crack very easily. I don't know when those were stopped but it is, not rare but often enough I run across one of those.

The early flat gasket was changed because it leaked, even with the road draft.

Ken Hand
Handy Car Care
248 613 8586

Vairmech@aol.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.