Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Need Part - fuel return clip
Posted by: flat_six ()
Date: September 08, 2021 08:29PM

Clip that secures the return pipe to the gas tank, 1966 turbo, Other years and models too?

I only need one, but would take 2-3 if you have some as these always seem to disappear.




Options: ReplyQuote
Re: Need Part - fuel return clip
Posted by: link9711 ()
Date: September 09, 2021 04:49AM

You should be able to get that at napa they should be able to match it up.looks like a body clip.



link9711
63 monza spyder
San Antonio Tx



Edited 1 time(s). Last edit at 09/09/2021 04:50AM by link9711.

Options: ReplyQuote
Re: Need Part - fuel return clip
Posted by: flat_six ()
Date: September 09, 2021 07:20AM

link9711 Wrote:
-------------------------------------------------------
> You should be able to get that at napa they should be able to match it up.looks like a body clip.
>
>
>
> link9711
> 63 monza spyder
> San Antonio Tx

I've not seen this anywhere else on cars. But that is worth a try. Also a paint and body supermart in town carries Auveco products. If they don't have it, I don't need it lol!

Options: ReplyQuote
Re: Need Part - fuel return clip
Posted by: link9711 ()
Date: September 09, 2021 04:54PM

OK check what I found on amazon [www.amazon.com] very close to what you got and more other types there.

link9711
63 monza spyder
San Antonio Tx

Options: ReplyQuote
Re: Need Part - fuel return clip
Posted by: link9711 ()
Date: September 09, 2021 05:21PM

Hmm looks like this ones backward's but may still work holding the line and there stainless no rust.


link9711
63 monza spyder
San Antonio Tx

Options: ReplyQuote
Re: Need Part - fuel return clip
Posted by: flat_six ()
Date: September 09, 2021 07:30PM

link9711 Wrote:
-------------------------------------------------------
> OK check what I found on amazon [www.amazon.com] very close to what you got and more other types there.
>
> link9711
> 63 monza spyder
> San Antonio Tx

That clip might actually work! I would need to wrap the pipe with tape or something, but that would still be better than NO clip.

There might even be enough material on that clip to allow it to be bent to work and appear like the original Corvair part...

Thanks for the find and link!

Mike



Edited 1 time(s). Last edit at 09/09/2021 07:34PM by flat_six.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.