A set of 4 15" Tru Spoke wire wheels circa 1984- with spinners-and lugs/washers. Bolt pattern appears to be Uni-lug- these were on a 1966 Corvair. Wheels have surface rust but still show very well. $450 plus Shipping (to lower 48 est. will be $200.) Message me with questions.
More pictures in 2nd post-

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY



Edited 1 time(s). Last edit at 03/31/2021 12:48PM by MattNall.

more pics

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

one more

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

I had a set of true spoke wire wheels on my 74 Ford Torino Elite. The thing I liked about them was that altho they were spoke wheels, they were also tubeless. The spokes didn't protrude into the area of where the tire seated. That's not the case with the original style wires. They required liners over the spoke nipples and a tube. What is the width of your wheels ? Your tape measure seems to show 6 1/2".
Your wheels look pretty good for a driver car, but a little rough for a show car. If I had a little more disposable cash right now, I would like to take them. Just bad timing

Doug Ward
Orange, Calif.
65 Corsa 180, 64 Monza convertible, 61 Lakewood, 61 Monza

They are the tubeless type and measure about 8" from outside rim to outside rim. save your money...I think will be around for awhile.

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

I just found out the shipping quote I got is incorrect- so anyone interested needs to get a separate quote from me based on destination- sorry for the confusion.

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

Here's my take om your tape measure pic. The tape 1" mark is at the inside of the rim. The inside of the other side is at the 7 1/2" mark. Subtracting for the 1" starting point, I get a net width of 6 1/2 ". Doug Ward

Doug Ward
Orange, Calif.
65 Corsa 180, 64 Monza convertible, 61 Lakewood, 61 Monza

I'll post a better pc later today. I believe the wheels measure 15 x 7.

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

As stated earlier- these are 15x7 rims- also they do NOT require a tube- (answering a question I received)- Phil

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

Back space ????????????

J.O.

65 Corsa Turbo Vert
79 Honda XL 500S
69 Honda CL 160 D
2010 BMW F 650 GS
2003 Bounder 36D
2013 KIA Optima SX turbo-AKA ZIPPY (wife,s car)
69 Newport Holiday Sailboat
Baja 150 dune buggy cart
Coleman HS 500 UTV
2016 KIA Sorento SXL Turbo

Bethlehem,Pa

Don't know how and don't care to measure for backspacing- But here's a pic with wheels on my LM. Should prove that they work on a Corvair.

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY

6-1/2" rims only need 3-4" BS

Video of how to measure BS

MODERATOR
Sea Mountain, between Charleston Harbor and Coos Bay! SW Oregon Coast
Click HERE for My Website...Click HERE for My TechPages!
...............110-PG.................................................Webered-Turbo

Matt, Please mark these SOLD- Thanks, Phil

"A sign of great intelligence is being able to say 'I don't know'"
1966 Corsa Turbo Coupe
Located 25 miles East of Rochester, NY