Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
FC rotesserie mounting
Posted by: 58binz ()
Date: November 07, 2020 09:23AM

Anyone out there put a Corvair Van on a auto rotisserie and if so was the bumper mounts sufficient enough alone? Thanks Lyn

Options: ReplyQuote
Re: FC rotesserie mounting
Posted by: MattNall ()
Date: November 07, 2020 10:09AM

That's all I remember seeing..

MODERATOR
Sea Mountain, between Charleston Harbor and Coos Bay! SW Oregon Coast
Click HERE for My Website...Click HERE for My TechPages!
..............................110-PG.................................................Webered-Turbo

Options: ReplyQuote
Re: FC rotesserie mounting
Posted by: RobertC ()
Date: November 07, 2020 11:47AM

If you remove the doors, you can install braces to keep the openings square.

I would assume people do that with their convertibles with the doors removed.

Options: ReplyQuote
Re: FC rotesserie mounting
Posted by: OLDCARMICHAEL ()
Date: November 17, 2020 07:09PM

This is not exactly what you ask but I've had 2 late model coupes on my rotesserie and mounted both on extended arms back to where the front susspinsion mounts to body. Used 2 }stacked} 2x2 square tubing to clear the lower valance. On the rear I mounted to where the rear engine mount bolts to. The only problem I encountered was when I loaded Car on rotesserie onto a trailer to have some media blast work done. I had to put a steel saw horse under the arms between the mounting bolts so there was no flex/bouncing. This worked great for me . Maybe this helps, or maybe just creates more questions.

Options: ReplyQuote
Re: FC rotesserie mounting
Posted by: American Mel ()
Date: November 18, 2020 11:01PM

Looks like the pictures at the Corvairkid's page shows Larry Palazzo's Rampside mounted on a rotisserie using the bumper mount positions.
( > Larry's Rampy< )
It seems that is the way that D.W. did it also, but that has been a few years, and I can not be sure.

-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
WA. state, 1 mile south of the Canadian border,
I am not at the end of the world, but you can see it from here.
Have; '66 Monza Coupe - 140, 4-spd. Daily driver beater
'67 Monza Vert. - 140, 4-spd. Daily driver beater
'67 A/C Moredoor Monza
Have had; '61 Monza coupe, 80hp, PG
'62 Monza Wagon, 4spd.
'63 Spyder,
'65 Corsa
.
non-vair
'04 Dodge Cummins Quad Dually, approaching 400K
'03 Honda Del Sol
17'Terry

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.