Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Where does the wiring harness go?
Posted by: doug6423 ()
Date: July 30, 2020 06:47PM

On a 65 does the new wiring harness in picture go in the center or off to the right the way I have it?

Thank you. smileys with beer

Doug
65 Monza
Cincy, OH

Attachments:
Re: Where does the wiring harness go?
Posted by: cnicol ()
Date: July 31, 2020 07:10PM

According to the '65 assembly manual, it starts out on the front right and then crosses over to the left side just aft of the shifter after the clip.

Page UPC 12 C2

Craig N. Coeur d'Alene ID.
66 Black Monza 4dr, 4.2L V8 49k
61 Seamist Jade Rampside 140 PG
60 Monza coupe (sold, sniff sniff)
66 Sprint Corsa convt - First car! Re-purchased 43 years later
2+2 gnatsuM 5691

+17 Tons of parts

Attachments:
Re: Where does the wiring harness go?
Posted by: RexJohnson ()
Date: July 31, 2020 07:33PM

It crosses over at the front edge of the seat riser in the floor, this way it doesn't stick down to push down the heater duct. There should be clips to hold it and I think that some of the clips are on the side of the tunnel.

RJ tools
Salem,Oregon

Re: Where does the wiring harness go?
Posted by: doug6423 ()
Date: August 01, 2020 05:58PM

Thank you both, I appreciate the feedback.

I'm down to getting the shift tube in with a short shift kit.

smileys with beer

Doug
65 Monza
Cincy, OH

Sorry, only registered users may post in this forum.
This forum powered by Phorum.