Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: February 21, 2020 04:18AM

ForSale: LM Suspension Parts and Hardware (USED).

All these parts came from 5 LM cars having less than 68k on them. One had 34k miles on it. Front strut rods being sold separately, anyone is interested in those. I have 2 ready to go.

Some parts have already been scrapped. Some parts are there just for show, as I know old rotted rubber can't and won't sell. Also damaged sleeve is going to be scrapped.

I have the parts you see in the photos. Prices will be less than our Vair vendors by at least 10%. If you are going to Helen in April and prepay for parts, I will deliver them to you at the SpringFest Hall.

All USPS shipping to be paid by the purchaser. USPS is 4 miles away. I will not use other shippers as they are much further away.

PM me, if interested in any of these parts. Give an offer that is reasonable for the parts you are looking for.

1st set of photos.

Al
Georgia



Edited 1 time(s). Last edit at 02/21/2020 07:44AM by MattNall.

Attachments:


Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: February 21, 2020 04:19AM

2nd set of photos.

Al
Georgia

Attachments:


Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: February 21, 2020 04:20AM

3rd set of photos.

Al
Georgia

Attachments:

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: FLSteve ()
Date: February 21, 2020 06:29PM

Wow hats off to you very nice work.

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: February 21, 2020 06:50PM

Just parts removed and shown as removed.

Here is the good work ones.

[corvaircenter.com]

Al
Georgia

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: March 06, 2020 02:22AM

Bump.

Al
Georgia

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Carburetor ()
Date: March 06, 2020 04:07AM

PM sent.

Jim C.
Chesterfield, MI

1966 Monza convertible (140 / PG)
2017 Chevrolet Trax (daily driver)
2017 Chevrolet Volt (wife's ride)


Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: March 10, 2020 04:06AM

Sale pending on one Vair set of control arms and torque arms.

Al
Georgia

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: April 15, 2020 03:16AM

Sold the control arms and torque arms.

Al
Georgia

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: August 25, 2020 03:43PM

During my More Door font suspension rework, I had all the used hardware and parts from the 5 suspensions I tore down out so I could pick the best. Only took 2 sleeves from the bunch. Now all the hardware (bolts, nuts, sleeves, anchor bolts washer, etc) is in the scrap bin to be sent to the recycle yard. Cleared another small bin to use for other reasons.

All the suspension pieces shown in photos above have also been moved outside into a scrap metal pile.

Sales are no longer available for these pieces.

Al
Georgia

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Vairismo ()
Date: August 25, 2020 07:58PM

I hope those front idler arms didn't get scrapped, that IMO would be unfortunate.
Wish I'd have noticed this post before. But if there is no request for them, I can't blame you.



Edited 1 time(s). Last edit at 08/25/2020 07:59PM by Vairismo.

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: August 26, 2020 02:24AM

Everything is outside in a bed liner waiting to be loaded into onto my trailer for
transport to the recycle yard. We are slowly filling up bed liner with steel parts. All our engine tins hae found their way there too. When full, it

will be taken off. I have two 55 gallon plastic drums collcting the aluminum.
Got a bunch in there also with engine top covers and rear covers. We have to
make room in our container for other items more important.

Our current position on used parts is if I have not used it and couldn't sell it
in one attempt, Scrap it, as it is worthless to us and everyone else.

Al
Georgia



Edited 1 time(s). Last edit at 08/26/2020 07:40AM by MattNall.

Options: ReplyQuote
Re: FS: LM Suspension Parts and Hardware (USED)
Posted by: Lane66m ()
Date: October 16, 2020 04:28AM

A 1st design LM backing plate is headed to a new home today. Thank you. J.O. for saving this part.

Al
Georgia

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.