Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Pages: Previous12
Current Page: 2 of 2
Re: Venturi cluster.
Posted by: northrop n9m ()
Date: February 02, 2020 01:30PM

I think I fixed the problem. I cleaned the carb and I think there was some dirt in the idle circuit. I also changed the needle and seat, checked the cluster gasket and set the float level and drop per Hob Helts book. I think I had the throttle set screw to far in and it was drawing fuel though the cluster.
Thanks for all the input, it's great having so many Peaple willing to offer advice.
Thanks again. Lane

Options: ReplyQuote
Re: Venturi cluster.
Posted by: JimBrandberg ()
Date: February 02, 2020 08:15PM

"I think I fixed the problem" is good news.

Jim Brandberg
Isanti, MN
CorvairRepair.com



Options: ReplyQuote
Re: Venturi cluster.
Posted by: keitho64 ()
Date: March 24, 2020 04:13AM

This sounds very similar to what I went through. Mine ended up being a hairline crack in the carb body where the Venturi cluster screws into place. Here is a link to that thread.

[corvaircenter.com]

Keith
64 Monza Convert 110 4-speed
69 911T (IROC Clone)
"Horizontally Opposed"
05 GTO 6-speed (Gotta have a V8)
Chicago Burbs; the Anti-Dragon... 11 turns in 318 miles

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
This forum powered by Phorum.