Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
WTB: AC support brace for Sanden needed
Posted by: vairshop ()
Date: September 09, 2019 04:14AM

hi all. a voice from past here, larry claypool.
trying to help a shop near me find an aftermarket adjustable brace that goes over a sanden compressor to the alt. adapter plate, see pic. somebody must make these, but they are kinda off the radar, and i've been out off it too long to be in the know.
thanks
lc

needpart



Edited 1 time(s). Last edit at 09/09/2019 08:35AM by MattNall.

Attachments:
Options: ReplyQuote
Re: WTB: AC support brace for Sanden needed
Posted by: MattNall ()
Date: September 09, 2019 08:36AM

Nice to hear from you! We were thinking you are the REAL Caveman!! But you finally came out!! GG

MODERATOR
Sea Mountain, between Charleston Harbor and Coos Bay! SW Oregon Coast
Click HERE for My Website...Click HERE for My TechPages!
..............................110-PG.................................................Webered-Turbo

Options: ReplyQuote
Re: WTB: AC support brace for Sanden needed
Posted by: TerribleTed ()
Date: September 09, 2019 11:29AM

Clark's may have what is needed. They sell Sandens and all necessary mounting parts for most applications

---------------------------------------------------------------------------------------------------------

Avid Corvair hobbiest since 1984.
I have personally performed ground up restoration on over 20 Corvairs.
I currently work full time at restoring and repairing Corvairs.
Located in the Atlanta Georgia area.
[www.facebook.com]

Options: ReplyQuote
Re: WTB: AC support brace for Sanden needed
Posted by: vairshop ()
Date: September 09, 2019 03:56PM

well, first thing checked is clarks...then ray sedman's site, then ebay...then just pain googled it, but no dice.
like i said, somebody is supplying these, but that person is off the radar. attached is a pic of one installed.
lc

Attachments:
Options: ReplyQuote
Re: WTB: AC support brace for Sanden needed
Posted by: TerribleTed ()
Date: September 09, 2019 04:44PM

Oh you want the long rod thingy. No clue where that comes from. Not used in Clark’s or any Sanden setups I have seen. The 140 setup I just worked on has a short bracket that mounts from down near the rear of the head and up to the top hole of the compressor to hold it up and tensioned. This is the setup Clark’s is using currently.

---------------------------------------------------------------------------------------------------------

Avid Corvair hobbiest since 1984.
I have personally performed ground up restoration on over 20 Corvairs.
I currently work full time at restoring and repairing Corvairs.
Located in the Atlanta Georgia area.
[www.facebook.com]



Edited 1 time(s). Last edit at 09/09/2019 04:47PM by TerribleTed.

Options: ReplyQuote
Re: WTB: AC support brace for Sanden needed
Posted by: The Stig ()
Date: September 09, 2019 06:38PM

Slick part! If there is a source for these I’d be interested in one. I have a sanden on a 140. It hasn’t been problematic but I have thought an additional brace would be nice.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
This forum powered by Phorum.