Corvair DiagramCorvair Photo
Corvair Center
home forum corvairs calendar links Corvair Podcast
California Corvairs
Clarks Corvair
Clarks Corvair
“CORSA"



Chevy Corvair License Plate
Chevy Corvair Chrome Wheel
Corvair Center Forum :  Corvair Center Phorum The fastest message board... ever.
Corvair Center 
Pages: 12Next
Current Page: 1 of 2
corvair ranch
Posted by: jamesb2645 ()
Date: April 07, 2019 10:39AM

Does anyone know anything about or have an opinion on the corvair ranch in Gettysburg,PA.?

Options: ReplyQuote
Re: corvair ranch
Posted by: edconnolly ()
Date: April 07, 2019 10:58AM

Excellent service! Jeff S. can supply even the most obscure parts. Highly recommend.

Options: ReplyQuote
Re: corvair ranch
Posted by: grubin ()
Date: April 07, 2019 01:39PM

worth the trip if uou can make it there Then taken in the sites I stop on my eay to Hersey each year

Options: ReplyQuote
Re: corvair ranch
Posted by: doug6423 ()
Date: April 07, 2019 02:15PM

I've bought front suspension parts from there. Got them quick, price was reasonable, and the parts were as described. I would definitely buy from again.

Options: ReplyQuote
Re: corvair ranch
Posted by: Caraholic4life ()
Date: April 07, 2019 03:24PM

I live within an hour of the Corvair Ranch and have been there several times.
In the past couple of years I have spent thousands of dollars purchasing parts for my current Corvair project.

Jeff and his staff are very knowledgeable about Corvairs. They are easy to deal with and as helpful as anyone could hope them to be.

They are a full service facility, have a comprehensive inventory of both new, reproduction, rebuilt, and used Corvair parts in stock, and a machine shop on site.
This is their full time job, not a part time effort. They ship parts on a daily basis. You can Get it at the Ranch!

1962 95 F.C. Van
1965 Monza Coupe
Westminster, Maryland

MID ENG enthusiast &
prior Kelmark owner.

Options: ReplyQuote
Re: corvair ranch
Posted by: curt ()
Date: April 07, 2019 04:08PM

I live 45 miutes from the Corvair Ranch...great people and service.

Options: ReplyQuote
Re: corvair ranch
Posted by: blackspyder ()
Date: April 07, 2019 04:17PM

I live 2.5 hours from there, I have been buying from them since the 1980's. If it cannot get there they ship the same day and it arrives the next day. Never a problem.

Roger Fedor
Whitehall, PA
1963 Spyder Coupe, currently undergoing re-restoration

Options: ReplyQuote
Re: corvair ranch
Posted by: zachness ()
Date: April 07, 2019 04:17PM

i agree with all the opinions here. i stopped in there while i was traveling in the area, Jeff personally gave me the full tour. there's a full-service shop for mechanical work (everything but bodywork, but they obviously have lots of body parts), lots of new parts in stock, and the yard - i spent a bit of time wandering the yard, took a lot of photos - amazing! i just needed a few parts for my Corvair brakes, he had everything on hand, reasonable prices.

Detroit, Michigan
former Corvairs:
1964 500 2dr (my first car, i bought it for $1!!!)
1965 Corsa turbo vert
presently:
65 Monza 4 door 110/PG
2006 Ford Freestar

Options: ReplyQuote
Re: corvair ranch
Posted by: subdude17349 ()
Date: April 07, 2019 05:03PM

Add one more to the list. I've also been dealing with the Ranch since Jeff took it over from John in the 80's.

Great service, good prices, and Jeff is as devoted to Corvairs as they come. All around good people.

Jim

65 Corsa Ct, 180/4, Blue/blue/white


Options: ReplyQuote
Re: corvair ranch
Posted by: jasvair ()
Date: April 07, 2019 05:37PM

Jeff is the beat and has most of the parts you need. He is very well respected in the Corvair community. I work closely with him.
John Sweet
John's Corvair Parts

Options: ReplyQuote
Re: corvair ranch
Posted by: MonzaJPD61 ()
Date: April 07, 2019 05:51PM

Although I've never visited the Ranch, I've ordered trim and trim clips from Jeff and he's been great to deal with. He's sourced new OEM trim clips I was not able to locate anywhere else (rocker trim clips for 1961 Monza coupe, special post clips for side pieces of rear window trim).

B'ham, AL
1961 Monza coupe 98hp, 4spd
1963 Monza coupe 102hp, pg
Vulcan Corvair Enthusiasts
[corvaircenter.com]

Options: ReplyQuote
Re: corvair ranch
Posted by: Frank DuVal ()
Date: April 07, 2019 07:12PM

thumbs upsmileys with beer

Frank DuVal

Fredericksburg, VA

Options: ReplyQuote
Re: corvair ranch
Posted by: detroitdude ()
Date: April 07, 2019 08:25PM

Bought part(s) from Corvair Ranch
excellent experience, highly recommending.
Someday before I'm dead would like
to see this place.

Dan Dood
69 Monza Convertible
66 500 Coupe

Detroit, Michigan

Options: ReplyQuote
Re: corvair ranch
Posted by: TerribleTed ()
Date: April 07, 2019 09:27PM

Excellent place to deal with!!! Jeff ROCKS!!, and he has a lot of parts as well.

---------------------------------------------------------------------------------------------------------

Avid Corvair hobbiest since 1984.
I have personally performed ground up restoration on over 20 Corvairs.
I currently work full time at restoring and repairing Corvairs.
Located in the Atlanta Georgia area.
[www.facebook.com]

Options: ReplyQuote
Re: corvair ranch
Posted by: eddieb ()
Date: April 08, 2019 05:44AM

Yes agree with all of the above. First visit was after '91 convention and lots of visits after that. If I wasn't 1000 miles away I'd probably be camped out in Jeff's front yard. LOL EddieB Dade City Florida

Options: ReplyQuote
Re: corvair ranch
Posted by: Mel ()
Date: April 08, 2019 06:05AM

Bought some EM tinted windows from the Ranch, smooth transaction smiling smiley

Orangeville, Ontario. CANADA

Options: ReplyQuote
Re: corvair ranch
Posted by: Timothy Shortle ()
Date: April 08, 2019 08:54AM

I am with that dude Dood. I want to make it there someday before I get old.
So far have only bought from Jeff and it's always the same. Fast shipping, fair prices, good stuff. I do enjoy seeing Jeff at the conventions and always have fun pleasant conversations with him.

Options: ReplyQuote
Re: corvair ranch
Posted by: Paulsgt ()
Date: April 08, 2019 09:09AM

He found me a Corvair "Purple Unicorn" a couple of years back. An FC top shroud for a 12-plate oil cooler. Fast, quality and reasonable!

Enjoy the Corvair.

Paul Sergeant
CORSA Central Division Director / CORSA Treasurer
Lee's Summit, MO
CORSA since 1975
Member – HACOA, Corvair Minnesota, CORSA, Little Indians, POCI


Options: ReplyQuote
Re: corvair ranch
Posted by: glivorsi ()
Date: April 08, 2019 12:24PM

Sold me the new floor pans for my LM vert. They also sold me cut out sections of used floor so I could harvest the tunnel sides from it. Excellent to deal with!

Greg in Wildwood, MO (part of the St. Louis urban sprawl)

1965 Monza Vert 110PG, Crocus Yellow with black interior and top

2014 Honda Accord V6 (DD)
2017 Honda Pilot (wifemobile)
2012 Chevy Sonic 1.8L (kid's car)
1997 Honda CBR1100XX
2006 Mazdaspeed 6 (no longer own)

Options: ReplyQuote
Re: corvair ranch
Posted by: Caraholic4life ()
Date: April 08, 2019 03:13PM

Addendum to my reply:

Some here have mentioned the "Fair Pricing" through the Corvair Ranch.

There have been occasions where I have told Jeff he needs to charge MORE.
He really does look out for his customers and their budgets. JMO

1962 95 F.C. Van
1965 Monza Coupe
Westminster, Maryland

MID ENG enthusiast &
prior Kelmark owner.

Options: ReplyQuote
Pages: 12Next
Current Page: 1 of 2


Sorry, only registered users may post in this forum.
This forum powered by Phorum.